PLC Mitsubishi Model FX2N-4AD-TC

PLC Mitsubishi Model FX2N-4AD-TC analog block amplifies the signal from four thermocouple sensors (Type K or J) and converts the data into 16 bit reading’s stored in the main unit. Both Centigrade (°C) and Fahrenheit (°F) can be read. Reading resolution is 0.4°C/0.72°F of Type K and 0.3°C/0.54°F of Type J.
• The FX2N-4AD-TC can connected to the FX0N/FX1N/FX2N/FX2NC/FX3G/FX3U/FX3UC series
Programmable Controllers (PLC).
• All data transfers and parameter settings are adjusted via software control of the FX2N-4AD-TC; by
use of the TO/FROM applied instructions in the PLC.
• The FX2N-4AD-TC occupies 8 I/O points on the PLC expansion bus. The 8 I/O points can be allocated
from either inputs or output.

PLC Mitsubishi Model FX2N-4AD-TC

Features :

Total input and output points: 8 points.
Input points: 8 points.
Output type: AC100V.
FX2N extension module.
The expansion module is an input and output expansion device of the power supply from the basic unit or the expansion unit,
Can choose the relay or crystal output models, to 8 points for the unit to connect FX2N-4AD-TC Manual FX2N-4AD-TC USER’S GUIDE.
Can be extended to FX3GA/FX3G, FX3GE, FX3GC, as well as FX3U, FX3UC series,
When connecting to FX3UC or FX3GC, you need FX2NC-CNV-IF or FX3UC-1PS-5V FX2N-4AD-TC
The number of connection points depends on the basic unit and the expansion unit. Input and output points: 20 points.
Power supply: AC100-240V.
Input points: 12 points.
Output points: 8 points.
Output form: relay output.
Power consumption: 20W FX2N-4AD-TC Manual FX2N-4AD-TC USER’S GUIDE.
Weight: 0.4KG.
Outline dimension: 75x90x75mm.
A new application model.
FX3SA is a basic model on the basis of the basic performance of FX1S above the expansion of the expansion of the new model.
FX3SA is applicable to all kinds of fields of small scale equipment which need to simulate the quantity and function of MODBUS and Ethernet.
Basic models suitable for small scale control.
Compact but powerful,
At the same time, the analog quantity and communication function, etc FX2N-4AD-TC Manual FX2N-4AD-TC USER’S GUIDE. . Input and output points: 16 points.
Input points: 8 points.
Input specification: leakage type.
Output points: 8 points.
Output form: relay output.
Power consumption: 6W.
Weight: 0.25KG.
Outline dimension: 34x90x87mm.
Hard and compact type third generation micro programmable controller.
Connector type input and output type provincial connection.
Greatly strengthened the industry”s highest level of high-speed processing and positioning and other built-in features.
High cost of the province space models.
FX3UC in the province of space, the province also greatly strengthened the connection of high-speed processing and positioning and other built-in features.
The host is built in DC24V power supply, the connector input and output form of the transistor output.
In addition, according to the produuct mix can also achieve network communications, analog control, data collection and other functions FX2N-4AD-TC Manual FX2N-4AD-TC USER’S GUIDE.
Third generation high function micro programmable controller.
Connector type can save space, province wiring FX2N-4AD-TC Manual FX2N-4AD-TC USER’S GUIDE.
Built in high speed processing and positioning.
Ultra small size, control points to 256 points.
Construction of CC-Link remote I/O 384 points.

error: Content is protected !!
× Admin Sales