The Velomitor XA (eXtended Application) Sensor is a ruggedized version of Bently Nevada’s 330500 Velomitor Sensor. Its 316L stainless steel case and unique, weatherproof connector and cable assembly permit mounting without a housing. The Velomitor XA Sensor cable assembly is suitable for use in moist environments, and the Velomitor XA Sensor design meets the requirements of IP-65 and NEMA 4X dust ratings when properly installed with a mating extension cable.

If you are measuring a machine housing to determine where to install transducers, consider what kinds of data you need to obtain. Most common machine malfunctions (imbalance, misalignment, and so forth) originate at the rotor and cause a change in rotor vibration. The location you select on the housing must accurately conduct rotor vibration to the transducer. Install the transducer carefully. If you don’t, the transducer may not accurately detect vibrations and can transmit invalid data. Bently Nevada provides engineering services to accurately measure machine housings and to install transducers.

Kami bergerak di bidang Mechanical-Electrical & Industrial Automation Systems. Untuk informasi harga, Penawaran dan Stok Barang, silahkan hubungi kami di bawah ini :

PT. Dutekindo Multi Kautsar
Address : Jl. Dr. Saharjo No. 86 RT/RW. 007/008
Kel. Pasar Manggis, Kec. Setiabudi, Jakarta Selatan 12960
Phone / WA : +62 859 4238 1853

The post Bently Nevada 330525 Velomitor appeared first on PT. Dutekindo Multi Kautsar.

The Bently Nevada 330980 Proximity Sensor incorporates numerous improvements over previous designs. Its physical packaging allows you to use it in high-density DIN-rail installations. You can also mount the sensor in a traditional panel mount configuration, where it shares an identical 4-hole mounting “footprint” with older Proximitor Sensor designs. The mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates. The 3300 XL NSV (narrow side view) Proximitor Sensor is highly immune to radio frequency interference, allowing you to install it in fiberglass housings without adverse effects from nearby radio frequency signals. The 3300 XL NSV Proximitor Sensor’s improved RFI/EMI immunity satisfies European CE mark approvals without requiring special shielded conduit or metallic housings, resulting in lower installation costs and complexity.

The three parts of the system must have consistent electrical lengths. The electrical length of the Proximitor probe plus the electrical length of the extension cable must equal the electrical length of the Proximitor.

Features

• Mounting options:
  • Panel mount
  • DIN mount
  • No mounting hardware
• Highly immune to radio frequency interference

Kami bergerak di bidang Mechanical-Electrical & Industrial Automation Systems. Untuk informasi harga, Penawaran dan Stok Barang, silahkan hubungi kami di bawah ini :

PT. Dutekindo Multi Kautsar
Address : Jl. Dr. Saharjo No. 86 RT/RW. 007/008
Kel. Pasar Manggis, Kec. Setiabudi, Jakarta Selatan 12960
Phone / WA : +62 859 4238 1853

The post Bently Nevada 330980 Sensor appeared first on PT. Dutekindo Multi Kautsar.

The Bently Nevada 990 Vibration Transmitter is intended primarily for the original equipment manufacturers (OEMs) of centrifugal air compressors or small pumps, motors, or fans who prefer to provide a simple 4 to 20 mA proportional vibration signal as the input to their machinery control system.

The 990 vibration transmitter is a 2-wire, loop-powered device that accepts input from Bently Nevada’s 3300 NSv proximity probes and a matching extension cable (available in 5 m and 7 m system length options). The transmitter conditions the signal into appropriate peak-to-peak vibration amplitude engineering units, and provides this value as a proportional 4 to 20 mA industry-standard signal as the input to the control system where machinery protection alarming and logic occurs.

Features :

• Integrated Proximitor Sensor requires no external unit
• Non-isolated “PROX OUT” and “COM” terminals plus a coaxial connector to provide a dynamic vibration and gap voltage signal output for diagnostics
• Non-interacting zero and span potentiometers under the Transmitter label supports loop adjustment
• Test Input pin for quick verification of loop signal output, using a function generator as the input
• A Power-up Inhibit circuit eliminates signal errors due to line voltage transients
• A Not OK/Signal Defeat circuit prevents high outputs or false alarms due to a faulty proximity probe or loose connection
• Choice of DIN-rail clips or bulkhead mounting screws as standard options simplifies mounting
• Potted construction for high humidity (up to 100% condensing) environments
• Compatibility with 3300 NSv proximity probe allows transducer installation in small areas with minimal clearance, typical of centrifugal air compressors

Kami bergerak di bidang Mechanical-Electrical & Industrial Automation Systems. Untuk informasi harga, Penawaran dan Stok Barang, silahkan hubungi kami di bawah ini :

PT. Dutekindo Multi Kautsar
Address : Jl. Dr. Saharjo No. 86 RT/RW. 007/008
Kel. Pasar Manggis, Kec. Setiabudi, Jakarta Selatan 12960
Phone / WA : +62 859 4238 1853

The post Bently Nevada 990 Transmitter appeared first on PT. Dutekindo Multi Kautsar.

The Bently Nevada 330500 Velomitor measures absolute (relative to free space) bearing housing, casing, or structural vibration. Unlike moving-coil velocity transducers, such as the Bently Nevada Seismoprobe family of velocity transducers, Velomitor Piezo-velocity sensors are specialized piezoelectric accelerometers that incorporate embedded integrated electronics in a solid-state design.

Because they incorporate solid-state electronics and have no moving parts, they do not suffer from mechanical degradation and wear, and can be mounted vertically, horizontally, or at any other angle of orientation.

Features Bently Nevada 330500 Velomitor

• 3.94mV/mm/s (100 mV/in/s) ±5% sensitivity
• Frequency response:
  • 4.5Hz to 5kHz (270cpm to 300kcpm) ±3.0dB
  • 6.0Hz to 2.5kHz (360cpm to 150kcpm) ±0.9dB
• 1270 mm/s (50 in/s) peak velocity
• 305m (1,000ft) max cable length
• -67 to 250°F (-55 to 121°C) operating temp range
• 316L stainless steel case material
• 2-pin Mil-C-5015 connector

Kami bergerak di bidang Mechanical-Electrical & Industrial Automation Systems. Untuk informasi harga, Penawaran dan Stok Barang, silahkan hubungi kami di bawah ini :

PT. Dutekindo Multi Kautsar
Address : Jl. Dr. Saharjo No. 86 RT/RW. 007/008
Kel. Pasar Manggis, Kec. Setiabudi, Jakarta Selatan 12960
Phone / WA : +62 859 4238 1853

The post Bently Nevada 330500 Velomitor appeared first on PT. Dutekindo Multi Kautsar.

Bently Nevada 330180 mounting base for either option provides electrical isolation and eliminates the need for separate isolator plates. The 3300 XL Proximitor Sensor is highly immune to radio frequency interference, allowing you to install it in fiberglass housings without adverse effects from nearby radio frequency signals. The 3300 XL Proximitor Sensor’s improved RFI/EMI immunity satisfies European CE mark approvals without requiring special shielded conduit or metallic housings, resulting in lower installation costs and complexity.

The three parts of the system must have consistent electrical lengths. The electrical length of the Proximitor probe plus the electrical length of the extension cable must equal the electrical length of the Proximitor.

Features Bently Nevada 330180 Proximity

• Part of the 3300 XL Transducer System
• Mounting options:
  • Panel mount
  • DIN mount
  • No mounting hardware
• Highly immune to radio frequency interference

Kami bergerak di bidang Mechanical-Electrical & Industrial Automation Systems. Untuk informasi harga, Penawaran dan Stok Barang, silahkan hubungi kami di bawah ini :

PT. Dutekindo Multi Kautsar
Address : Jl. Dr. Saharjo No. 86 RT/RW. 007/008
Kel. Pasar Manggis, Kec. Setiabudi, Jakarta Selatan 12960
Phone / WA : +62 859 4238 1853

The post Bently Nevada 330180 Proximity appeared first on PT. Dutekindo Multi Kautsar.