Bently Nevada 330500 Velomitor

Bently Nevada 330500 Velomitor

The Bently Nevada 330500 Velomitor measures absolute (relative to free space) bearing housing, casing, or structural vibration. Unlike moving-coil velocity transducers, such as the Bently Nevada Seismoprobe family of velocity transducers, Velomitor Piezo-velocity sensors are specialized piezoelectric accelerometers that incorporate embedded integrated electronics in a solid-state design.

Because they incorporate solid-state electronics and have no moving parts, they do not suffer from mechanical degradation and wear, and can be mounted vertically, horizontally, or at any other angle of orientation.

Features Bently Nevada 330500 Velomitor

  • 3.94mV/mm/s (100 mV/in/s) ±5% sensitivity
  • Frequency response:
    • 4.5Hz to 5kHz (270cpm to 300kcpm) ±3.0dB
    • 6.0Hz to 2.5kHz (360cpm to 150kcpm) ±0.9dB
  • 1270 mm/s (50 in/s) peak velocity
  • 305m (1,000ft) max cable length
  • -67 to 250°F (-55 to 121°C) operating temp range
  • 316L stainless steel case material
  • 2-pin Mil-C-5015 connector

Kami bergerak di bidang Mechanical-Electrical & Industrial Automation Systems. Untuk informasi harga, Penawaran dan Stok Barang, silahkan hubungi kami di bawah ini :

PT. Dutekindo Multi Kautsar
Address : Jl. Dr. Saharjo No. 86 RT/RW. 007/008
Kel. Pasar Manggis, Kec. Setiabudi, Jakarta Selatan 12960
Phone / WA : +62 859 4238 1853

error: Content is protected !!
× Admin Sales